Biancoat WColored BianCoat for Wood.
Basic 7 colors and 1 transparent.
FOR USE ONWooden construction material(solid wood)
FEATURESInorganic : Wood grain stays nicely by glass-forming paint
High permeability makes long lasting effect Neither discoloration nor fading after 2500 hours test by UV tester No fading of color by rain Coating protects from mold and ants No dart penetration helps you easy maintenance Aging paint can be applied DETAILS
Standard specification is mat finish
*It is possible to produce glossy finish type upon request Protect eave soffit from rain and water stains. Dirt from plants adheres to coat, but it is easy to have maintenance. |
Organic resin coating promises high weather resistance, however the places which have rain water deteriorate soon....And lose its original taste in a few years.
|
Before application*Basically, it is same as normal paint, therefore, the conditions of application is changed by temperature and humidity in application.
*Please test by using samples of same material or applying to inconspicuous place and confirm the adherence and finish before application. *Repair surface and make surface treatment with sanding #120 - #240 *Clean and remove dirt from target surface. *Remove also wood powder by surface treatment. *If the water remains target surface, it will cause problems such as whitening. Therefore, it is important to be dried completely. *Dry moisture enough and remove oils and fat from target surface. DIrection for useIn application to solid wood. Temperature 25 degrees Celsius. Humidity 50%,
Dilution is not needed. 1st application Apply by brush as much as possible Amount of application volume is 40 - 50g/m2 Drying for 1st application Wait for coat to dry for 1 hours in summer time and 2 hours in winter time to walk on applied surface. After 30 minutes it is safe to touch. 2nd application Remove fuzzing from surface by sanding #320-#400. Apply by floor mop as thin as possible but not fainted. Amount of application volume is 20g/m2 Drying for 2nd application Wait for coat to dry for 2 hours. After 30 minutes it is safe to touch. Complete drying take 2 days. For each additional coat add 3 hours to drying time. Note : *Do not apply near open flames *Be sure to keep work area well ventilated as BianCoat is used safe alcohol agent and is cured by air. *It takes more time to cure if temperature is lower than above condition. *It may cause problems on curing, if there is moisture on target surface for long time before it completely dried. *It is important to pay attention not to be wet before complete cure. *It had better not to make application especially when it is rain or it is going to be rain. *Amount of application volume may change by condition of wood. Matt: Matt type (UV protection is included)
Glossy : Glossy type Hydrophobic type : more to have hydrophobic SUGGESTED TOOLSBrush
|
BianCoat W penetrates into wood and forms protective layers of glass inside of wood to shut UV rays out. As the result, BianCoat W prevent wood from degradation and fading for a long time.
BianCoat W is also applied to traditional building such as temples
and parts of castles in Japan. Aging application was made to above building. |
aPPLICATION
At 1st application, we need to penetrate enough volume into wood.
It is possible to make aging application, but matured technique is needed for it.
It is possible to make aging application, but matured technique is needed for it.
ourside wall and fence
This customer was bothered with color fading from UV rays and rains. Color by organic paint was gone within 2 years and wall started degradation.
After testing half month, they are happy with the result. Therefore they decided to apply all surface of wooden construction parts at their house.
After testing half month, they are happy with the result. Therefore they decided to apply all surface of wooden construction parts at their house.
Outside wall and eaves soffit
Wooden care house applied with BianCoat W. Beauty finish!
Wooden figures and parts
Applied to wooden figures and parts of national treasure
Mat type VS hydrophobic type
2 seconds after pouring water to the BianCoat W applied surface.
(left) hydrophobic type (right) mat type (nomal)
(left) hydrophobic type (right) mat type (nomal)
Test result of xenon arc lamp method
certificate_of_appraisal_english.pdf | |
File Size: | 55 kb |
File Type: |
Please refer to above documents about result of xenon arc lamp method weathering test.