you may find solution here.
General questions on BianCoat
Q1. Is glass coating really glass?
A1. BianCoat is realized almost 100% of glass property. *High hardness, insulator etc.
A1. BianCoat is realized almost 100% of glass property. *High hardness, insulator etc.
Q2. What is advantage of nano composite technology on BianCoat?
A2. Bond of small molecular forms strong film or layer and prevent target materials from dirt, water, humidity and scratches. Even invisible tiny space can be covered over and make as even as possible therefore maintenance such as cleaning is much easier than before application.
A2. Bond of small molecular forms strong film or layer and prevent target materials from dirt, water, humidity and scratches. Even invisible tiny space can be covered over and make as even as possible therefore maintenance such as cleaning is much easier than before application.
Q3. Is it dangerous to handle?
A3. BianCoat as agent is same as normal paint on safety matter. BianCoat contains alcohol agent therefore, it is flammable, and need ventilation while working. However, property will be changed completely after curing. It will be almost 100% glass property and it is safe as it has property of formaldehyde free, flame retardant and so on. Container applied BianCoat can be used for container for food as it fulfilled its condition of standards and criteria for food and food additives, etc. (Notification No.370 of Ministry of health in 1958 in Japan).
A3. BianCoat as agent is same as normal paint on safety matter. BianCoat contains alcohol agent therefore, it is flammable, and need ventilation while working. However, property will be changed completely after curing. It will be almost 100% glass property and it is safe as it has property of formaldehyde free, flame retardant and so on. Container applied BianCoat can be used for container for food as it fulfilled its condition of standards and criteria for food and food additives, etc. (Notification No.370 of Ministry of health in 1958 in Japan).
Q4. Is there any guarantee from maker?
A4. Bianco Japan has quality assurance on products in shipping, however, the judge whether guarantee of application is included or not is made by applied company.
A4. Bianco Japan has quality assurance on products in shipping, however, the judge whether guarantee of application is included or not is made by applied company.
Q5. Working cloth in application
A5.
A5.
- Wear cap/hood, long sleeve shirts and ankle length trouser(squeezable hem, working cloth without making dust or waste thread ) not to make hair fall on applying surface.
- Use anitperspirant tool not to fall sweat on applying surface in application.
BianCoat B
Q1. Does glass coating agent mean the agent which coats glass?
A1. No. Glass coating is new type of coating which makes glass film coat after curing. It is same property as glass except unbreakable by its flexibility.
A1. No. Glass coating is new type of coating which makes glass film coat after curing. It is same property as glass except unbreakable by its flexibility.
Q2. Is it wax?
A2. It is different from wax, once it is applied, its effect lasts for a long time.
A2. It is different from wax, once it is applied, its effect lasts for a long time.
Q3. What is difference from other glass coating agent?
A3. BianCoat B is added property of flexibility on glass. Other glass coat products were designed to be added property of glass on soft organic painting.
Therefore, the way of designing is totally different than others and there is big difference between BianCoat and other glass coating.
A3. BianCoat B is added property of flexibility on glass. Other glass coat products were designed to be added property of glass on soft organic painting.
Therefore, the way of designing is totally different than others and there is big difference between BianCoat and other glass coating.
Q4. Whati is suitable tool to apply?
A4. Microfiber mop and melamine sponge is our recommendation.
A4. Microfiber mop and melamine sponge is our recommendation.
Q5. Is it easy to apply as every one can make?
A5. It is easy for anyone to apply, if the application is done quickly and carefully. However, the knowledge and techniques as professional are need to judge the substrate, to adjust substrate and to finish the surface.
A5. It is easy for anyone to apply, if the application is done quickly and carefully. However, the knowledge and techniques as professional are need to judge the substrate, to adjust substrate and to finish the surface.
Q6. How long does its last?
A6. Advantage of BianCoat B is long lasting life of glass film. The life time depends on application how it made and adhesive against substrate.
A6. Advantage of BianCoat B is long lasting life of glass film. The life time depends on application how it made and adhesive against substrate.
Q7. Is there any information which flooring is suitable for or not against BianCoat?
A7. There is information covered with some company's flooring, however it is not covered with all maker's flooring. Please ask for sample from flooring maker and make test application about adhesive and design.
A7. There is information covered with some company's flooring, however it is not covered with all maker's flooring. Please ask for sample from flooring maker and make test application about adhesive and design.
Q8. About hardness of surface
A8. As BianCoat B is flexible for dent and designed not to break, therefore the damage from dent follows substrate. Please check well on this.
A8. As BianCoat B is flexible for dent and designed not to break, therefore the damage from dent follows substrate. Please check well on this.
Q9. Is it possible to apply solid wood?
A9. There is non coating, urethane clear finish and natural paint finish on solid wood. In case of flooring, making substrate not to soak in or applying as top coat after checking substrate. In case of fitting, making 2 times application and finishing by removing rough surface, then anti-dirt function works well.
A9. There is non coating, urethane clear finish and natural paint finish on solid wood. In case of flooring, making substrate not to soak in or applying as top coat after checking substrate. In case of fitting, making 2 times application and finishing by removing rough surface, then anti-dirt function works well.
Q10. Is it possible to apply BinaCoat over natural paint.
A10. It is good evaluation at their internal test in Japan Emviro Chemicals regarding to application on xiladecor. Please confirm change of color tone and oozing before application on the other painting.
A10. It is good evaluation at their internal test in Japan Emviro Chemicals regarding to application on xiladecor. Please confirm change of color tone and oozing before application on the other painting.
Q11. Is there any unsuitable flooring to apply?
A11. It is not possible to apply high water repellent flooring. *Fluorine process finish, silicone resin, silicone oil coat surface, melamine facing plate can not apply properly. Please ask for sample of floor from maker and make test application. Or please check by applying to low-visibility area.
A11. It is not possible to apply high water repellent flooring. *Fluorine process finish, silicone resin, silicone oil coat surface, melamine facing plate can not apply properly. Please ask for sample of floor from maker and make test application. Or please check by applying to low-visibility area.
Q12. What should it be paid attention to in application.
A12. In case of flexible flooring used for soundproof floor and direct laying floor, unevenness in application tends to happen by unflat surface. Apply to finish carefully piece by piece. Or it is also good to assembly floor which is applied BianCoat B at working place beforehand.
A12. In case of flexible flooring used for soundproof floor and direct laying floor, unevenness in application tends to happen by unflat surface. Apply to finish carefully piece by piece. Or it is also good to assembly floor which is applied BianCoat B at working place beforehand.
Q13. Circumstance in application.
A13.
A13.
- Basically it is same as normal paint, if temperature is lower, curing time gets longer. Check the temperature and humidity in application. (Do not apply under 5 degrees Celsius or over 70 % humidity. It may be reason of deluster, whitening and failure of curing.)
- BianCoat tends to dry faster in the period of high temperature, it makes leveling easier by using dilution for BianCoat that drying time makes longer. It makes curing time faster by using highly-volatile pure alcohol (which does not include moisture) such as IPA(Isopropyl alcohol) or ethanol as dilution in the period of low temperature.
- It may cause trouble on deluster and failure of curing or on remaining humid after cleaning in condition of high humidity
- Plan the working schedule with enough margins for curing time, and well arranged on preparation before application.
- Alcohol stays on coated surface in closed room, and chemical reaction may not proceed. Keep door open or turn on ventilator, be careful to have air circulation not to be closed room.
- If the direct wind blows on coated surface and it may cause unevenness on process of curing film. Be careful not to direct wind blow on surface of coated surface when turning on air conditioner.
Q14. Adjustment of substrate.
A14.
A14.
- Repair scratches of substrate and deteriorated part before application, Finish clear coat should be selected not to melt by dilution of BianCoat ( Butanol or other 2 pack type dilution which is mixed with curing agent)
- It should be degreased not to remain fat and oils on target surface by using alcohol.
- Existing wax should be removed or degreased by peeling agent not to give any damage to substrate.
- In case plenty of water is used in washing substrate, please make one day interval or use ventilator and fans to dry completely. As moisture remains in substrate, it may cause failure of curing or whitening.
- In case agent is used for clean substrate, dry the agent completely.
- Dust should be carefully removed by using vacuum machine. Clean from upper side not to leave dust on not only applying surface but also place where dust tends to piles such as sash frame, curtain rail, baseboard and so on. Dust can not removed if it is under cured film of BianCoat B.
- The place BianCoat B should not be applied, put curing tapes over completely not to soak in.
- In case coating was applied as substrate, apply after agent of coating is volatiled completely. (It may be reason of causing deluster, if drying is not complete.)
Q15. What should it be care in working
A15.
A15.
- Plan the application period with enough margins, and pay attention to have enough time for each process and avoid difficulties place and time for movable goods for carry-in and carry-out.
- Removable goods in applying room should be removed as many as possible to make circumstance of smooth application work.
- If it is necessary to separate application, the boarder should be separate from joint of flooring.
- Do not apply wide area at once but small area along the longer piece direction with leveling the boarder.
- Thick application may be reason of crack. Keep instructed volume and apply as thin as possible.
- Application to floor near wall or corner tends to be reservoir of agent, therefore apply thinly to such kind of place by melamine sponge.
- In case of application by microfiber mop, make coating agent contain enough to the mop and drain it not to drip. Then apply as thin as possible.
- If 2nd application was made before 1st application dries enough, finish may be whitened and fainted by pulling half dry film. Therefore 2nd application should be made after the agent was dried enough. In addition, it may be reason to be fainted by repeating application to the same point.
- If there is long time duration between 1st application and 2nd application, adjustment of substrate helps to have good adhesive.
- Chemical finish floor must be applied twice. At 2nd application, direction of application should be crossed against 1st application. Then unevenness from absorbing at 1st application can be covered well.
- In case of using low pressure gun, adjustment of dilution should be made by purpose, caliber and pressure. Pay attention that hardness of film gets lower by diluting too much.
- Selection and adjustment of machinery should be paid attention not to spatter agent by mist.
- Wear protector such as protective eye glass and mask to avoid contacting to eyes and swallowing.
Q16. Curing after application
A16.
A16.
- Light walk is possible to made on applied surface 3 to 4 hours after application. Until then, keep away anyone and anything from applied floor. However, if it is lower temperature, the curing time should be cared to be longer.
- Keep away from water until the applied agent get cured completely. Contact with moisture may be reason to have failure of curing such as whitened and blistered.
- In case of failure of curing, remove the parts with sand paper and apply thinly again.
Q17. After maintenace
A17.
A17.
- Dirt on film which was completely cured can be removed by wet lag or neutral detergent.
- Use "Easy wipe cleaner" or scrub with white pad putting alcohol detergent for resinous dirt from sole of shoe or dirt from maker.
Biancoat W
Q1. What is different from BianCoat B
A1. BianCoat B makes glass film and protect surface while BianCoat W forms protective glass layers inside of wood. Those layers shut out UV rays and prevent from deteriorate and fading of woods for a long time. While BianCoat W does not make film so wood can breathe and keep good condition.
A1. BianCoat B makes glass film and protect surface while BianCoat W forms protective glass layers inside of wood. Those layers shut out UV rays and prevent from deteriorate and fading of woods for a long time. While BianCoat W does not make film so wood can breathe and keep good condition.
Q2. What is different from paint for wood?
A2. Organic resinous paint for wood gets deteriorated fast especially where exposed to rain. On the other hand, BianCoat W have water repellent property and high weathering resistance. Therefore wooden components are protected from various troubles and fading.
A2. Organic resinous paint for wood gets deteriorated fast especially where exposed to rain. On the other hand, BianCoat W have water repellent property and high weathering resistance. Therefore wooden components are protected from various troubles and fading.
Q3. What is suitable material for BianCoat M.
A3. Wooden material (Solid wood)
A3. Wooden material (Solid wood)
Q4. Is it easy to apply as every one can make?
A4. It is easy for anyone to apply, if the application is done quickly and carefully. However, the knowledge and techniques as professional are need to judge the substrate, to adjust substrate and to make aging finish.
A4. It is easy for anyone to apply, if the application is done quickly and carefully. However, the knowledge and techniques as professional are need to judge the substrate, to adjust substrate and to make aging finish.
Q5. How long does it last compared to organic resinous paint?
A5. It depends on whether condition on location. Generally, organic resinous paint lasts for 3 years. BianCoat W protects from deterioration and fading more than 10 years.
A5. It depends on whether condition on location. Generally, organic resinous paint lasts for 3 years. BianCoat W protects from deterioration and fading more than 10 years.
Q6. What is the reason of fading and deterioration of wood?
A6. There are various reasons. Damage from ultra violet light, erosive by rain water, blackish by propagating of mold, rotten by wood-decaying fungus and vermin damage by wood insect pest. BianCoat W protects from those damage.
A6. There are various reasons. Damage from ultra violet light, erosive by rain water, blackish by propagating of mold, rotten by wood-decaying fungus and vermin damage by wood insect pest. BianCoat W protects from those damage.
Q7. Is there any guarantee from maker?
A7. Bianco Japan has quality assurance on products in shipping, however, the judge whether guarantee of application is included or not is made by applied company.
A7. Bianco Japan has quality assurance on products in shipping, however, the judge whether guarantee of application is included or not is made by applied company.
Q8. About hardness of surface
A8. As BianCoat W is permeable type so that it does not make firm on surface. Therefore, it is not so strong for scratches as BianCoat B. However, surface has water repellent property from protective glass layers. Smaller molecular of BianCoat does not allow bigger molecular of water to soak into wood.
A8. As BianCoat W is permeable type so that it does not make firm on surface. Therefore, it is not so strong for scratches as BianCoat B. However, surface has water repellent property from protective glass layers. Smaller molecular of BianCoat does not allow bigger molecular of water to soak into wood.
Q9. What is suitable tool?
A9. Brush is suitable for application. It is important to make wood contain BianCoat W enough at 1st application. Roller application is difficult to make it.
A9. Brush is suitable for application. It is important to make wood contain BianCoat W enough at 1st application. Roller application is difficult to make it.
Q10. Circumstance in application.
A10.
A10.
- Basically it is same as normal paint, if temperature is lower, curing time gets longer. Check the temperature and humidity in application. (Do not apply under 5 degrees Celsius or over 70 % humidity. It may be reason of deluster, whitening and failure of curing.)
- It may cause trouble on failure of curing or on remaining humid after cleaning in condition of high humidity
- Plan the working schedule with enough margins for curing time, and well arranged on preparation before application.
- Alcohol stays on coated surface in closed room, and chemical reaction may not proceed. Keep door open or turn on ventilator, be careful to have air circulation not to be closed room.
- If the direct wind blows on coated surface and it may cause unevenness on process of curing film. Be careful not to direct wind blow on surface of coated surface when turning on air conditioner.
- In case of application outside, choose the fine day to apply or arrange not to contact with moisture such as rain.
Q11. Adjustment of substrate.
A11.
A11.
- Repair scratches of substrate and deteriorated part before application.
- Surface should be finished with grain level 180-240 sandpaper.
- Dust and grained powder should be removed without damaging target surface.
- It should be degreased not to remain fat and oils on target surface by using alcohol agent.
- In case plenty of water is used in washing substrate, please make one day interval or use ventilator and fans to dry completely. As moisture remains in substrate, it may cause failure of curing or whitening and covered not to contact with moisture such as rain.
- In case agent is used for clean substrate, dry the agent completely.
- Moisture contents of target material must be less than 18%
- Existing paint should be removed by sanding. If it is thin tone of color, it is possible to apply over. Check by testing application at low-visibility area before application.
- The place BianCoat W should not be applied, put curing tapes over completely not to soak in.
- In case preserved treatment was made, there is possibility of causing failure of curing. Check by testing application at low-visibility area before application.
Q12. What should it be care in working
A12.
A12.
- Plan the application period with enough margins, and pay attention to have enough time for each process and avoid difficulties place and time for movable goods for carry-in and carry-out.
- Removable goods in applying room should be removed as many as possible to make circumstance of smooth application work.
- If it is necessary to separate application, the boarder should be separate at appropriate boarder.
- Do not apply wide area at once but small area with leveling the boarder.
- Apply enough amount to soak into wood at 1st application to make glass layer inside of wood.
- If 2nd application was made before 1st application dries enough, layer inside of woods does not form to have water repellent property. Therefore 2nd application should be made after the agent was dried enough(estimated curing time at summer 1 hour, at winter 2 hours).
Q13. Curing after application
A13.
A13.
- Keep away from water until the applied agent get cured completely. Contact with moisture may be reason to have failure of curing such as whitened and blistered.
Q14. After maintenace
A14.
A14.
- Dirt on surface which was completely cured can be removed by wet lag, washing brush, water, neutral detergent.
BIANCOAT M
UNDER CONSTRUCTION
General questions on cleaner
Q1. Is it possible to use cleaner without gloves?
A1. As it may get a rash from cleaner to keep touching it for a long time, Please use gloves when you use cleaner.
A1. As it may get a rash from cleaner to keep touching it for a long time, Please use gloves when you use cleaner.
Q2. Is it possible to spray directly to the target?
A2. As every cleaner makes chemical decomposition against dirt and rust, the effectiveness of cleaning changes by the time of contacts with cleaner. Spray makes fine drops and there will be differences where spray was on or not.sprayed place and where the place where sprayed and They are left as it is for longer after application, and cleaner reacts much further with material. But if the time how long the cleaner is left is different in parts by parts, its difference makes unevenness on surface. In application of cleaner, spread the cleaner not to be dripped down, scrub before cleaner dried and remove dirt and cleaner by washing away by water or wiping away with wet rag. By repeating to wash, unevenness can not be happen and make decomposition of dirt.
A2. As every cleaner makes chemical decomposition against dirt and rust, the effectiveness of cleaning changes by the time of contacts with cleaner. Spray makes fine drops and there will be differences where spray was on or not.sprayed place and where the place where sprayed and They are left as it is for longer after application, and cleaner reacts much further with material. But if the time how long the cleaner is left is different in parts by parts, its difference makes unevenness on surface. In application of cleaner, spread the cleaner not to be dripped down, scrub before cleaner dried and remove dirt and cleaner by washing away by water or wiping away with wet rag. By repeating to wash, unevenness can not be happen and make decomposition of dirt.
Q3. Is it possible to sewage down used water including cleaner to drain?
A3. Cleaner is mainly consisted from safe material, therefore it is possible to sewage down to drain. However, please do not discharge used water to the natural circumstance such as river. This is examples in Japan. Please follow domestic regulation on this matter.
A3. Cleaner is mainly consisted from safe material, therefore it is possible to sewage down to drain. However, please do not discharge used water to the natural circumstance such as river. This is examples in Japan. Please follow domestic regulation on this matter.
Q4. How long is it possible to use after opening once.
A4. Liquid type : If it gets high temperature, organic acid started decomposition and the effectiveness of cleaner gets weaker. It depends on how it is stored, however it is possible to use for one year if it is stored dark and cool place.
Rust stain remover: It may be damaged from mold and decay in hot and humid as the cleaner is consisted of natural material. Tightly closed the container and avoid direct sunlight and store in cool and dark place.
A4. Liquid type : If it gets high temperature, organic acid started decomposition and the effectiveness of cleaner gets weaker. It depends on how it is stored, however it is possible to use for one year if it is stored dark and cool place.
Rust stain remover: It may be damaged from mold and decay in hot and humid as the cleaner is consisted of natural material. Tightly closed the container and avoid direct sunlight and store in cool and dark place.
Q5. Does contact of cleaner give any damages on cloths such as making hole?
A5. No, it does not make hole but it may cause fading on cloth. Use apron or working cloth on working with cleaner.
A5. No, it does not make hole but it may cause fading on cloth. Use apron or working cloth on working with cleaner.
Q6. Is it possible to throw away waste as garbage?
A6. Please do not mix with waste of other agent. Especially, acidic cleaner and chlorine based cleaner such as bleaching agent and mold remover should not be mixed. It is dangerous because those mixture makes chlorine gas.
A6. Please do not mix with waste of other agent. Especially, acidic cleaner and chlorine based cleaner such as bleaching agent and mold remover should not be mixed. It is dangerous because those mixture makes chlorine gas.
aluminum cleaner
Q1. What kind of dirt pollution can be removed by aluminum cleaner?
A1. Remove dirt and rust on aluminum. (bleaching by aluminum oxide, blackish)
A1. Remove dirt and rust on aluminum. (bleaching by aluminum oxide, blackish)
Q2. What is suitable material for aluminum cleaner?
A2. Alumite products from aluminum with silver or bronze finish. It revitalize aluminum products such as sash frame and window grille.
A2. Alumite products from aluminum with silver or bronze finish. It revitalize aluminum products such as sash frame and window grille.
Q3. What is not suitable material for aluminum cleaner?
A3. Colored and black finished aluminum products may change the tone of paint by aluminum cleaner. Please use Fluorine coat for colored and black finish aluminum products. Aluminum products which is not finished alumite may be finished with whitened after cleaning. Therefore please do not clean those products by aluminum cleaner.
A3. Colored and black finished aluminum products may change the tone of paint by aluminum cleaner. Please use Fluorine coat for colored and black finish aluminum products. Aluminum products which is not finished alumite may be finished with whitened after cleaning. Therefore please do not clean those products by aluminum cleaner.
Q4. Is it possible to clean dirt adhered to aluminum wheel with aluminum cleaner?
A4. Most of dirt on aluminum wheel is iron powder from brake. It is suitable by cleaning Rust stain remover to remove those rust and iron powder.
A4. Most of dirt on aluminum wheel is iron powder from brake. It is suitable by cleaning Rust stain remover to remove those rust and iron powder.
Q5. Is it possible to dilute the aluminum cleaner?
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
Q6. Does it matter if aluminum cleaner contacts on other material?
A6. Please prepare vinyl sheet and cover the other material except aluminum not to spatter aluminum cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A6. Please prepare vinyl sheet and cover the other material except aluminum not to spatter aluminum cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Q7. Is it possible to clean aluminum panel by aluminum cleaner?
A7. If the target surface is wide range such as panels, the finished surface may be seen unevenness by using pads with abrasive or compound. Please pay attention to the method and selection of tools not to have unevenness in that case.
A7. If the target surface is wide range such as panels, the finished surface may be seen unevenness by using pads with abrasive or compound. Please pay attention to the method and selection of tools not to have unevenness in that case.
Q8. Target surface after cleaning by aluminum cleaner looks like sun burned skin. Or it looks like white chalky. What is the reason and what is counter measure for it?
A8. Usually aluminum sash was made alumite treatment and applied clear paint with baking acrylic on it. Aluminum cleaner removes rust on aluminum (bleaching by aluminum oxide) but not powdered deteriorated clear paint (bleaching from resin). Restore original taste like brand new aluminum products by using clear paint with peeling agent which does not damage aluminum material.
A8. Usually aluminum sash was made alumite treatment and applied clear paint with baking acrylic on it. Aluminum cleaner removes rust on aluminum (bleaching by aluminum oxide) but not powdered deteriorated clear paint (bleaching from resin). Restore original taste like brand new aluminum products by using clear paint with peeling agent which does not damage aluminum material.
Easy wipe cleaner
Q1. What kind of dirt can be removed by Easy wipe cleaner?
A1. Ugly dirt from oil and fat, joist bond which was left without wiping enough.
A1. Ugly dirt from oil and fat, joist bond which was left without wiping enough.
Q2. What is suitable material for Easy wipe cleaner?
A2. Resinous products such as vinyl chloride sheet and rubber products. Any other impermeable material.
A2. Resinous products such as vinyl chloride sheet and rubber products. Any other impermeable material.
Q3. What is not suitable material for Easy wipe cleaner?
A3. Unevenness may happen by soaking water including dirt into permeable material. Please not to use for permeable material.
A3. Unevenness may happen by soaking water including dirt into permeable material. Please not to use for permeable material.
Q4. Is it possible to dilute the Easy wipe cleaner?
A4. It depends on the how much dirt is adhered. Please try and confirm it. Generally, tile cleaner is applied to target surface with sponge which sprayed cleaner and includes water or with sponge which includes cleaner diluted with water at 2 to 3 times beforehand. Use cleaner without dilution for ugly dirt.
A4. It depends on the how much dirt is adhered. Please try and confirm it. Generally, tile cleaner is applied to target surface with sponge which sprayed cleaner and includes water or with sponge which includes cleaner diluted with water at 2 to 3 times beforehand. Use cleaner without dilution for ugly dirt.
Q5. Does it matter if Easy wipe cleaner contacts on other material?
A5. There should no be any problem. However if dirty water is spattered then it gets dirty. Please prepare vinyl sheet and cover the other material except target not to spatter water or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A5. There should no be any problem. However if dirty water is spattered then it gets dirty. Please prepare vinyl sheet and cover the other material except target not to spatter water or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Q6. Target surface get speckled by using Easy wipe cleaner.
A6. Unevenness may happen by soaking water including dirt into permeable material. Hard scrubbing may damage and unevenness by scrubbing hard with cleaning tool with abrasive sponge or pad.
A6. Unevenness may happen by soaking water including dirt into permeable material. Hard scrubbing may damage and unevenness by scrubbing hard with cleaning tool with abrasive sponge or pad.
Efflorescence cleaner
Q1. What kind of dirt can be removed by Efflorescence cleaner?
A1. Remove efflorescence containing calcium carbonate as main component. .
A1. Remove efflorescence containing calcium carbonate as main component. .
Q2. What is suitable material for Efflorescence cleaner?
A2. Stone materials, tiles and so on.
A2. Stone materials, tiles and so on.
Q3. What is not suitable material for efflorescence cleaner?
A3. it is not suitable material containing calcium carbonate such as exposed concrete, mortar, concrete products.
A3. it is not suitable material containing calcium carbonate such as exposed concrete, mortar, concrete products.
Q5. Is it possible to dilute Efflorescence?
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
Q6. Does it matter if efflorescence cleaner contacts on other material?
A6. Please prepare vinyl sheet and cover the other material except target object not to spatter efflorescence cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A6. Please prepare vinyl sheet and cover the other material except target object not to spatter efflorescence cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Q7. Is there any possibility that stainless steel parts gets rust by efflorescence?
A7. Efflorescence cleaner does not include hydrochloric acid at all and is low-metal-corrosive products. There will be no problem if spattered place was washed away with water enough.
A7. Efflorescence cleaner does not include hydrochloric acid at all and is low-metal-corrosive products. There will be no problem if spattered place was washed away with water enough.
Q8. If efflorescence is used for vertical surface, then cleaner drip down.
A8. Please be contained cleaner to absorbent cotton and attached it to target surface. Then cleaner can contact target surface for long time.
A8. Please be contained cleaner to absorbent cotton and attached it to target surface. Then cleaner can contact target surface for long time.
Q9. How should thick efflorescence be treated?
A9. Remove protruding efflorescence by scraping not to damage target surface before hand. It is effective to use Efflorescence cleaner as finish cleaner.
A9. Remove protruding efflorescence by scraping not to damage target surface before hand. It is effective to use Efflorescence cleaner as finish cleaner.
Q10. Is it possible use Efflorescence cleaner for hot spring facilities?
A10. It is effective to remove efflorescence which contains include calcium carbonate or carbonate as hot spring component, however, if it contains sulfur a lot, then sulfur component remains. Please check the component of hot spring and test the effectiveness before use.
A10. It is effective to remove efflorescence which contains include calcium carbonate or carbonate as hot spring component, however, if it contains sulfur a lot, then sulfur component remains. Please check the component of hot spring and test the effectiveness before use.
Fluorine coat
Q1. Is Fluorine coat coating agent?
A1. Fluorine coat is protective and cleaning agent makes it realize at same time both effects cleaning and fluorine coating.
A1. Fluorine coat is protective and cleaning agent makes it realize at same time both effects cleaning and fluorine coating.
Q2. What kind of dirt can be removed by Fluorine coat?
A2. It can be removed dirt and dirt of chalking (powder from degreased paint component ) adhered on resinous products and baking finish surface, and preventing its recurrence for a long time. And application of Fluorine coat to target surface after washing metal surface gives coating effects,
A2. It can be removed dirt and dirt of chalking (powder from degreased paint component ) adhered on resinous products and baking finish surface, and preventing its recurrence for a long time. And application of Fluorine coat to target surface after washing metal surface gives coating effects,
Q3. What is suitable material for Fluorine coat?
A3. Resinous products such as vinyl chloride sheet and rubber products. Any other impermeable material.
A3. Resinous products such as vinyl chloride sheet and rubber products. Any other impermeable material.
Q4. What is not suitable material for Fluorine coat?
A4. Unevenness may happen by soaking water including dirt into permeable material. Please not to use for permeable material.
A4. Unevenness may happen by soaking water including dirt into permeable material. Please not to use for permeable material.
Q5. Is it possible to dilute Fluorine coat?
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
Q6. Does it matter if Easy wipe cleaner contacts on other material?
A6. There should no be any problem. Please wipe away from spattered place with wet rag.
A6. There should no be any problem. Please wipe away from spattered place with wet rag.
Q7. Can unevenness of wash be caused by Fluorine coat?
A7. Fine spherical calcium carbonate is used as abrasive for Fluorine coat. In case of cleaning soft material and large spaces such as panel, wash whole surface at even force.
A7. Fine spherical calcium carbonate is used as abrasive for Fluorine coat. In case of cleaning soft material and large spaces such as panel, wash whole surface at even force.
Q8. Is it possible to clean dirt of aluminum sash?
A8. It removes dirt from colored aluminum and restores luster. However, in case of white round-shaped and rough white rust and black oxide dirt on alumite products of silver and bronze type, clean oxide dirt by Aluminum cleaner then use Fluorine coat.
A8. It removes dirt from colored aluminum and restores luster. However, in case of white round-shaped and rough white rust and black oxide dirt on alumite products of silver and bronze type, clean oxide dirt by Aluminum cleaner then use Fluorine coat.
Q9. Which case Fluorine coat can be used for aluminum, stainless steel, etc.?
A9. After cleaning by Aluminum cleaner and Stainless steel cleaner, metal base appears. Aluminum and stainless steel forms protective layer of oxide film naturally, Fluorine coat strengthens its protective function by application and makes luster by protective agent.
Q10. Which case Fluorine coat can be used for resinous products and baking finish surface?
A10. It can be removed dirt and dirt of chalking adhered.(powder from degreased paint component )
Q11. What kind of painted surface does it affected?
A11. There is no problem on baking paint film, however in case of volatile drying paint at normal temperature such as lacquer may be melt or cause shrink, please test at low-visibility before use.
Glass cleaner
Q1. What kind of dirt can be removed by Glass cleaner?
A1. Dirt from fur can be removed.
A1. Dirt from fur can be removed.
Q2. What is suitable material for Glass cleaner?
A2. Water metal fittings, bath and bath room, mirror, glass etc.
A2. Water metal fittings, bath and bath room, mirror, glass etc.
Q3. What is not suitable material for granite cleaner?
A3. Special glass such as surface processed glass, tempered glass. Do not use for wind shield of car as it is made special polish and process. Coating applied on surface will be removed.
A3. Special glass such as surface processed glass, tempered glass. Do not use for wind shield of car as it is made special polish and process. Coating applied on surface will be removed.
Q5. Is it possible to dilute Glass cleaner?
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
A5. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
Q6. Does it matter if Glass cleaner contacts on other material?
A6. Please prepare vinyl sheet and cover the other material except target surface not to spatter cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A6. Please prepare vinyl sheet and cover the other material except target surface not to spatter cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Q7. Is there any special tool for washing mirror?
A7. We recommend to use hand polish pad for glass #4 contains abrasive so called Cerium oxides for mirror finish process as main component not to damage mirror.
A7. We recommend to use hand polish pad for glass #4 contains abrasive so called Cerium oxides for mirror finish process as main component not to damage mirror.
Q8. Dripping track of glass cleaner was left by spraying directly to target surface.
A8. Repeat scrubbing patiently by hand polish pad for glass #4 until the track disappear or scrubbing with compound to remove oil film on wind shield. (main component should be Cerium oxides)
A8. Repeat scrubbing patiently by hand polish pad for glass #4 until the track disappear or scrubbing with compound to remove oil film on wind shield. (main component should be Cerium oxides)
Q9. Mirror in bathroom looks clean while it is wet, however, it turned white like film is covered when it is dry.
A9. There is fine unevenness on mirror surface in bathroom as it is hydrophilic mirror. It may be caused by dirt in that unevenness. Repeat scrubbing patiently, it gets cleaner gradually.
A9. There is fine unevenness on mirror surface in bathroom as it is hydrophilic mirror. It may be caused by dirt in that unevenness. Repeat scrubbing patiently, it gets cleaner gradually.
Q10. It does not work at all.
A10. There is difference in precipitated dirt by water quality in every community. It may not be difficult to clean the efflorescence from water which contain sulfur a lot.
A10. There is difference in precipitated dirt by water quality in every community. It may not be difficult to clean the efflorescence from water which contain sulfur a lot.
Granite cleaner
Q1. What kind of dirt can be removed by granite cleaner?
A1. Dirt, rust and efflorescence adhered on granite.
A1. Dirt, rust and efflorescence adhered on granite.
Q2. What is suitable material for granite cleaner?
A2. Granite construction materials, exterior terrazzo made of white cement (artificial granite).
A2. Granite construction materials, exterior terrazzo made of white cement (artificial granite).
Q3. What is not suitable material for granite cleaner?
A3. It is not suitable for materials or stones which are weak for acid represented by granite.
A3. It is not suitable for materials or stones which are weak for acid represented by granite.
Q4. Is it possible to dilute granite cleaner?
A4. It depends on the how much dirt is adhered. Please try and confirm it. Generally, tile cleaner is applied to target surface with sponge which sprayed cleaner and includes water or with sponge which includes cleaner diluted with water at 2 to 3 times beforehand. Use cleaner without dilution for ugly dirt.
A4. It depends on the how much dirt is adhered. Please try and confirm it. Generally, tile cleaner is applied to target surface with sponge which sprayed cleaner and includes water or with sponge which includes cleaner diluted with water at 2 to 3 times beforehand. Use cleaner without dilution for ugly dirt.
Q5. Does it matter if granite cleaner contacts on other material?
A5. There should no be any problem. However if dirty water is spattered then it gets dirty. Please prepare vinyl sheet and cover the other material except target not to spatter water or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A5. There should no be any problem. However if dirty water is spattered then it gets dirty. Please prepare vinyl sheet and cover the other material except target not to spatter water or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Rust stain remover
Q1. What is suitable material for Rust stain remover?
A1. Any impermeable materials.
A1. Any impermeable materials.
Q2. What is not suitable material for Rust stain remover?
A2. If it used for permeable material, purple reduction color reacted with rust may soak in and remain. Please do not use for permeable material.
A2. If it used for permeable material, purple reduction color reacted with rust may soak in and remain. Please do not use for permeable material.
Q3. Is it possible to dilute Rust stain remvoer?
A3. Please use it as undiluted. Effectiveness of remover gets weaken by dilution.
A3. Please use it as undiluted. Effectiveness of remover gets weaken by dilution.
A4. Rust can not be removed by applying and scrubbing.
Q4. Scrubbing by rust stain remover, remover does not react with rust enough. Leave 5 to 10 minutes without scrubbing, and then wash away with water or wipe up with wet rag.
Q4. Scrubbing by rust stain remover, remover does not react with rust enough. Leave 5 to 10 minutes without scrubbing, and then wash away with water or wipe up with wet rag.
Q5. Does it matter if rust stain remover conatacts on other material?
A5. If there is permeable material around, please prepare vinyl sheet and cover the other material not to spatter dirty water.
A5. If there is permeable material around, please prepare vinyl sheet and cover the other material not to spatter dirty water.
Q6. Cleaning rust of brass with rust stain remover, it turns speckled. Is it possible to clean more nicely?
A6. After removing rust from brass, please use Fluorine coat. Fine calcium carbonate abrasive remove dirt on surface, fluorine film restores luster.
A6. After removing rust from brass, please use Fluorine coat. Fine calcium carbonate abrasive remove dirt on surface, fluorine film restores luster.
Q7. Is it possible to remove thick rust from iron?
A7. Remove protruding rust and loose rust piece by scraping before hand. In case of hard corrosion, as remover may stuck in the corrosive hole, wash enough by water.
A7. Remove protruding rust and loose rust piece by scraping before hand. In case of hard corrosion, as remover may stuck in the corrosive hole, wash enough by water.
Q8. Which is better to use Aluminum cleaner or Rust stain remover to remove the dirt adhered aluminum wheel?
A8. It is suitable to use Rust stain remover to remove dirt on aluminum wheel. However, please pay attention not to leave more than 5 minutes. Please do not use for powder coating finish wheel.
A8. It is suitable to use Rust stain remover to remove dirt on aluminum wheel. However, please pay attention not to leave more than 5 minutes. Please do not use for powder coating finish wheel.
Q9. In case of hard rust, is it more effective to leave long time after application of Rust stain remover?
A9. Rust stain remove react to rust and turn to purple. In case of stone material which is even slightly permeable material, remover may soak in and material itself turns purple inside. Really light purple is disappeared by reacting oxygen in the air in a short time, however soaking level is deep, then it takes time to be decolored. Repeat in process of applying in short time and washing away, then there will be less possibility of trouble on coloring.
A9. Rust stain remove react to rust and turn to purple. In case of stone material which is even slightly permeable material, remover may soak in and material itself turns purple inside. Really light purple is disappeared by reacting oxygen in the air in a short time, however soaking level is deep, then it takes time to be decolored. Repeat in process of applying in short time and washing away, then there will be less possibility of trouble on coloring.
Q10. Using rust stain remover to remove rust on granite, purple color does not removed.
A10. Purple color is disappeared by reacting oxygen in the air, however please use white spirits paste in case of urgent decolorant.
A10. Purple color is disappeared by reacting oxygen in the air, however please use white spirits paste in case of urgent decolorant.
Q11. Is there any problems on using rust stain remover to silver or stainless steel tableware.
A11. There is no problems. However, not to use for high design and valuable goods.
A11. There is no problems. However, not to use for high design and valuable goods.
Q12. Is there anything to pay attention in cleaning of mirror finish on metal surface?
A12. Remaining remover on copper for long time, reduction progresses too much and turns black. Please do not leave for a long time even on other metal, repeat in process of leaving for about 5 minutes after application and washing away,
A12. Remaining remover on copper for long time, reduction progresses too much and turns black. Please do not leave for a long time even on other metal, repeat in process of leaving for about 5 minutes after application and washing away,
stainless steel cleaner
Q1. What kind of dirt pollution can be removed by stainless steel cleaner?
A1. Remove dirt from rust and fur on stainless steel for construction material.
A1. Remove dirt from rust and fur on stainless steel for construction material.
Q2. What is suitable material for stainless steel cleaner?
A2. Stainless steel products used as interior and exterior stainless such as sink, post box, handrails, columns etc.
A2. Stainless steel products used as interior and exterior stainless such as sink, post box, handrails, columns etc.
Q3. What is not suitable material for stainless steel cleaner?
A3. Stainless steel have each different standard for every usage and quality. Please use after checking the effectiveness and finish of stainless steel except construction use.
A3. Stainless steel have each different standard for every usage and quality. Please use after checking the effectiveness and finish of stainless steel except construction use.
Q4. Is it possible to dilute the stainless steel cleaner?
A4. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
A4. Please use it as undiluted. Effectiveness of cleaner gets weaken by dilution.
Q5. Does it matter if stainless steel cleaner contacts on other material?
A5. Please prepare vinyl sheet and cover the other material except stainless steel not to spatter stainless steel cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A5. Please prepare vinyl sheet and cover the other material except stainless steel not to spatter stainless steel cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Q6. Dripping of stainless steel cleaner was left by mistake in cleaning. Or unevenness by spattered cleaner to other place without noticing was left. What is the reason and what is counter measure for it?
A6. Nano level difference by difference of contact time of cleaner and material can be confirmed visually by reflection of light. It will be restored to original mirror finish by scrubbing with compound to remove oil film on wind shield.
A6. Nano level difference by difference of contact time of cleaner and material can be confirmed visually by reflection of light. It will be restored to original mirror finish by scrubbing with compound to remove oil film on wind shield.
Tile cleaner
Q1. What kind of dirt can be removed by tile cleaner?
A1. Blackish from smoke, harshness of cement, bleed of seal material, rust and dirt from rain drop of exterior tile. Interior tile. Fur stains from ceramic.
A1. Blackish from smoke, harshness of cement, bleed of seal material, rust and dirt from rain drop of exterior tile. Interior tile. Fur stains from ceramic.
Q2. What is suitable material for tile cleaner?
A2. All burned tiles applied graze and ceramic products
A2. All burned tiles applied graze and ceramic products
Q3. What kind of tile is not suitable material for tile cleaner?
A3. Do not use tile cleaner for metallic lustrous tile and pearl tile. They may be changed its design by metal oxide. There is possibility of peeling off print from design printed tile. Gloss may be disappeared by cleaning on the imported tile which make glossy surface by polishing. It may remove coating on surface of tile. (grazing is not included)
Divided sheet type construction material such as tile carpet and cork tile is named as tile but it is not available for those.
A3. Do not use tile cleaner for metallic lustrous tile and pearl tile. They may be changed its design by metal oxide. There is possibility of peeling off print from design printed tile. Gloss may be disappeared by cleaning on the imported tile which make glossy surface by polishing. It may remove coating on surface of tile. (grazing is not included)
Divided sheet type construction material such as tile carpet and cork tile is named as tile but it is not available for those.
Q4. Is it possible to dilute the tile cleaner?
A4. It depends on the how much dirt is adhered. Please try and confirm it. Generally, tile cleaner is applied to target surface with sponge which sprayed cleaner and includes water or with sponge which includes cleaner diluted with water at 2 to 3 times beforehand. Use cleaner without dilution for ugly dirt.
A4. It depends on the how much dirt is adhered. Please try and confirm it. Generally, tile cleaner is applied to target surface with sponge which sprayed cleaner and includes water or with sponge which includes cleaner diluted with water at 2 to 3 times beforehand. Use cleaner without dilution for ugly dirt.
Q5. Does it matter if tile cleaner contacts on other material?
A5. Please prepare vinyl sheet and cover the other material except tile not to spatter tile cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A5. Please prepare vinyl sheet and cover the other material except tile not to spatter tile cleaner or pour water to other materials and after cleaning is finished then wash away with water. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Q6. Does glass gets burned if cleaner spattered?
A6. In case that the high temperature of glass surface makes reaction faster of cleaner or that spattered cleaner leaves as it is, then it may gives damages to glass. Therefore put water beforehand and when wash cleaner and dirt away with water, please pour water to glass, too. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
A6. In case that the high temperature of glass surface makes reaction faster of cleaner or that spattered cleaner leaves as it is, then it may gives damages to glass. Therefore put water beforehand and when wash cleaner and dirt away with water, please pour water to glass, too. If undiluted cleaner was spattered on the other material, there will be no problem by wiping away soon.
Q7. Does it blight plants by spattered tile cleaner in washing exterior tile?
A7. It may not happen to blight because of tile cleaner. However, there is possibility to blight short root plant by shortage of water. Especially after blooming or making fruit, plants is weaken than other period. If plant does not have enough water in those period, there is possibility that they blight. Please sprinkle to the plants before cleaning starts.
A7. It may not happen to blight because of tile cleaner. However, there is possibility to blight short root plant by shortage of water. Especially after blooming or making fruit, plants is weaken than other period. If plant does not have enough water in those period, there is possibility that they blight. Please sprinkle to the plants before cleaning starts.
Others
Q1. Which cleaner is suitable for cleaning of tiles in bathroom.
A1. Tile cleaner.
A1. Tile cleaner.
Q2. Which cleaner is suitable for cleaning blackish dirt on concrete floor and walls.
A2. Generally, cleaning the dirt on concrete was made by high pressure water washing. The washing method is different by kind of dirt, for example, mold, moss, graffiti deterioration.
A2. Generally, cleaning the dirt on concrete was made by high pressure water washing. The washing method is different by kind of dirt, for example, mold, moss, graffiti deterioration.
Q3. Which cleaner is suitable for cleaning dirt on marble?
A3. Polished marble should be clean by "Easy wipe cleaner" or "Fluorine coat". Or use mixture of those 2 cleaner to remove dirt.
A3. Polished marble should be clean by "Easy wipe cleaner" or "Fluorine coat". Or use mixture of those 2 cleaner to remove dirt.
Q4. What kind of cleaner is suitable for removing adhesive like white powder in heater pot.
A4. There is some heater pot which has function of cleaning by citric acid. After adding "Stainless steel cleaner" to water fulfilled pot, push "cleaning by citric acid" or boil it. Then wash by water until all cleaner is removed.
A4. There is some heater pot which has function of cleaning by citric acid. After adding "Stainless steel cleaner" to water fulfilled pot, push "cleaning by citric acid" or boil it. Then wash by water until all cleaner is removed.
Q5. Which cleaner is suitable for cleaning dirt on unit bath?
A5. Light level dirt on unit bath can be removed by "Easy wipe cleaner". Middle level dirt can be removed by "Fluorine coat". After cleaning, please wash away with water until all bubbles are gone. Use "Glass cleaner" for ugly dirt from fur. Use "Rust stain remover" for dirt from rust.
A5. Light level dirt on unit bath can be removed by "Easy wipe cleaner". Middle level dirt can be removed by "Fluorine coat". After cleaning, please wash away with water until all bubbles are gone. Use "Glass cleaner" for ugly dirt from fur. Use "Rust stain remover" for dirt from rust.
Q6. Is "Stainless steel cleaner" suitable for cleaning dirt on stainless steel bath?
A6. "Stainless steel cleaner" is cleaner to remove rust, blackish dirt from oxides and fur on stainless steel. Use "Easy wipe cleaner" to remove fats and oils.
A6. "Stainless steel cleaner" is cleaner to remove rust, blackish dirt from oxides and fur on stainless steel. Use "Easy wipe cleaner" to remove fats and oils.
Q7. What kind of cleaner is suitable for cleaning toilet?
A7. Use "Tile cleaner" to clean ceramic parts and use "Easy wipe cleaner" or "Bianco Meister"to clean plastic parts.
A7. Use "Tile cleaner" to clean ceramic parts and use "Easy wipe cleaner" or "Bianco Meister"to clean plastic parts.
Q8. What will happen if those cleaner was mixed up with other cleaners?
A8. "Tile cleaner", "Aluminum cleaner", "Stainless steel cleaner", "Granite cleaner" and "Efflorescence cleaner" may make chlorine gas by mixing up with chlorine based cleaner such as bleaching agent and mold remover which includes sodium hypochlorite and hydrochloric acid. Please do not mix with waste of other agent as it is dangerous.
A8. "Tile cleaner", "Aluminum cleaner", "Stainless steel cleaner", "Granite cleaner" and "Efflorescence cleaner" may make chlorine gas by mixing up with chlorine based cleaner such as bleaching agent and mold remover which includes sodium hypochlorite and hydrochloric acid. Please do not mix with waste of other agent as it is dangerous.
Q9. Does it make more effective by leaving "Aluminum cleaner" and "Stainless steel cleaner" for longer time?
A9. They are left as it is for longer after application, and cleaner reacts much further with material. But if the time how long the cleaner is left is different in parts by parts, its difference makes unevenness on surface. In application of cleaner, spread the cleaner not to be dripped down, scrub before cleaner dried and remove dirt and cleaner by washing away by water or wiping away with wet rag. By repeating to wash, unevenness can not be happen and make decomposition of dirt.
A9. They are left as it is for longer after application, and cleaner reacts much further with material. But if the time how long the cleaner is left is different in parts by parts, its difference makes unevenness on surface. In application of cleaner, spread the cleaner not to be dripped down, scrub before cleaner dried and remove dirt and cleaner by washing away by water or wiping away with wet rag. By repeating to wash, unevenness can not be happen and make decomposition of dirt.